Никто не подсказал, но вопрос решен ![:)](images/smilies/sm.gif)
Спасибо всем!
Вдруг кому понадобится - мануал:
Код:
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of three actions: pressing the FEED switch, pressing and holding the FEED switch, and opening or closing the paper cover.
1. Entering memory switch setting mode.
Set paper to the printer and keep the printer cover open. With the FEED button pressed and held, turn the printer power on, and then press the FEED button twice. Close the cover. If the current settings of the memory switch etc. are printed, the printer is now in the memory switch setting mode.
0: OFF state
Memory SW (1) 00000000 1: ON state
(No indication for 0/1 with memory switch ranging from 7 to 10)
2. Selecting memory switch
When the FEED button is pressed short (within 2 seconds), printing occurs in the order of “Memory SW1” > “Memory SW2” > “Memory SW3” >
......“Memory SW10” > “Save To Memory” > “Memory SW1” > ......
repeatedly. When the memory switch you want to change is reached, press and hold the FEED button (for more than 2 seconds).
3. Selecting each switch item
2-8 items are provided for setting in each switch. By pressing and holding the FEED button long, the printer goes to the next item and prints the current setting of the item. Repeat pressing and holding till the item you want to change is reached.
OFF state: ERROR LED OFF
Power ON Info (Valid) ON state: ERROR LED ON
(With memory switch ranging from 7 to 10, ERROR LED goes on only at the factory setting.)
4. Changing the setting
When the item you want to change is printed, press the FEED button short. The changed set value is printed. (When change of set value is repeated, the original set value is recovered). When you press the FEED button long, the set value is accepted and then the printer goes to the next setting item.
5. Returning to the memory switch select mode
When the setting of the desired content is completed, open the printer cover and then close the printer cover. This allows the printer to print the setting of the changed memory switch.
6. Saving the setting and exiting the memory switch setting mode
Press the FEED button short to move to “Save To Memory”. Then press and hold the FEED button. The printer prints the content of new setting and exits the memory switch setting mode to return to the normal standby state.
* Unless saving the setting is executed, the changed setting cannot be enabled.
7. Initializing the memory switch
When you want to return the memory switch setting to the initial state, go to “Save To Memory” in the above procedure. Here, open the printer cover and press and hold the FEED button till buzzer sounds. This allows the printer to return to the initial state.
* All the memory switches settings are returned to the factory set values.
Не понял, как сделать скрытым тегом - может модераторы поправят.